15” WELD ON BEADLOCKS

Weld on beadlocks that actually center your tire on the rim! Regular wheels do it, wheels manufactured as beadlocks do it, why don’t weld on kits do it? When you clamp a tire bead between two flat plates of steel there is nothing to center the tire during assembly and nothing to keep it centered during hard off road abuse. We set out to solve that problem and came up an inexpensive light weight solution. That solution is seven centering lugs that are evenly spaced around the wheel and welded into place on the inner ring to provide positive centering of the tire. Our beadlocks are made from laser cut 1/4” steel and are held together by 27, 3/8” grade 8 bolts.

No one wants to spend all day searching for hardware and valve stems, so we include all of the bolts, nuts, washers, and 90* bent valve stems you need to install your beadlocks.

Grade 8 hardware is expensive when you are buying it one piece at a time from a hardware store. We buy our hardware in bulk and pass the savings on to you, this hardware/valve stem package would cost over $190 if purchased at my local hardware and tire stores.

Kit includes:
4       inner rings
4       outer rings
28     centering lugs
112   3/8 grade 8 bolts
112   3/8 grade 8 nylock nuts
224   washers
4       90* bent valve stems

Installation on your wheels or new wheels is available, please call for details.

Weld Beadlocks
 
 

IMPORTANT INFORMATION ABOUT THIS PRODUCT:

Weld on beadlock kits for 17” rims are coming soon.
This product requires extensive modification to your wheels and is recommended for off road use only.
This product requires welding that is critical to the safety, durability, and performance of your wheels.
We recommend that all welding be performed by a qualified welder.

Custom fabrication and product installation is available on a limited basis. Please Contact us for details.